Coating: | Coating |
---|---|
Tooth Form: | Spiral Tooth |
Tooth Space: | Extra Dense Tooth |
Still deciding? Get samples of US$ 2/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Custom Long Length Flat End Mill HRC65 for Steel
Carbide Material Introduction | ||||||
ENDMILL GRADE |
Material Grade | Grain | Introduction | Application | ||
HRC45 carbide material | YL10.2 | 0.6μm | YL10.2 is tungsten carbide powder with 89.7% WC and 10% cobalt powder, and has high toughness and wear resistance. | Suitable for General Steel | ||
HRC55 carbide material | K30 | 0.5μm | K30 is ultra fine grain and containes Ni and Cr element, which provides high strength and good toughness. | General Steel, cast Steel, cast iron |
||
HRC60 carbide material | WF25 | 0.4μm | WF25 is 0.4micron ultrafine carbide powder and provides very high toughness and wear resistance. | High Hard Material, steel, cast iron, etc | ||
HRC65 carbide material | GU25UF | 0.4μm | GU25UF is 0.4micron powder with 12% cobalt and has very high toughness and wear resistance.It is the most suitable for hard cutting. | Titanium Alloy, High-temperature Alloy, Harden material, etc | ||
Stainless Steel material | WF25 | 0.4μm | WF25 is 0.4micron ultrafine carbide powder and provides very high toughness and wear resistance. | stainless steel |
Coating Introduction | ||||||
ENDMILL GRADE | Coating Name | Color | Hv | μm | Friction | The Max ºC |
HRC45 coating | AlTiN | black | 3300 | 1-4 | 0.7 | 850ºC |
HRC55 coating | TiSiAlN | bronzed | 3400 | 1-4 | 0.7 | 900ºC |
HRC60 coating | AlCrSiN | black | 4000 | 1-7 | 0.35 | 1100ºC |
HRC65 coating | nACo 3 Blue | blue | 4500 | 1-7 | 0.45 | 1200ºC |
Stainless Steel coating | nACo 3 Blue | blue | 4500 | 1-7 | 0.45 | 1200ºC |
1) Please contact us if you meet any product quality problem;
2) Please contact us if you meet any custom clearance problem;
3) Please contact us if you get wrong products or miss something;