| Customized: | Non-Customized |
|---|---|
| Standard: | DIN |
| Length: | Overlength |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
 |
|
|
|
Tungsten Drilling Cutter Cemented Carbide 55 Degree Twist Drill with coating
| Carbide Material Introduction | ||||||
| Drill Bit GRADE |
Material Grade | Grain | Introduction | Application | ||
| HRC45 carbide material | YL10.2 | 0.6μm | YL10.2 is tungsten carbide powder with 89.7% WC and 10% cobalt powder, and has high toughness and wear resistance. | Suitable for General Steel | ||
| HRC55 carbide material | K30 | 0.5μm | K30 is ultra fine grain and containes Ni and Cr element, which provides high strength and good toughness. | General Steel, cast Steel, cast iron |
||
| HRC60 carbide material | WF25 | 0.4μm | WF25 is 0.4micron ultrafine carbide powder and provides very high toughness and wear resistance. | High Hard Material, steel, cast iron, etc | ||
| Coating Introduction | ||||||
| Drill Bit GRADE | Coating Name | Color | Hv | μm | Friction | The Max ºC |
| HRC45 coating | AlTiN | black | 3300 | 1-4 | 0.7 | 850ºC |
| HRC55 coating | TiSiAlN | bronzed | 3400 | 1-4 | 0.7 | 900ºC |
| HRC60 coating | AlCrSiN | black | 4000 | 1-7 | 0.35 | 1100ºC |
1) Please contact us if you meet any product quality problem;
2) Please contact us if you meet any custom clearance problem;
3) Please contact us if you get wrong products or miss something;
){kind=link}